dating: 16th/17th Century provenance: Europe, Long, thin iron lock plate, cusped upwards in the central part, with thin lobes at the ends; iron se...

dating: First half of the 17th Century provenance: Italy, Flat lock plate with sloping and cusped edges, the two ends with small lobes. Pan with s...

dating: about 1580 provenance: Italy, Flat plate of rectangular shape, provided with two holes to assemble it and with the edges featuring frames ...

dating: First half of the 17th Century provenance: Brescia, Flat plate with cusped borders, the wheel is held by a thin ring-nut with forked edges...

dating: 18th Century provenance: Tuscan-Emilian area, Slightly-round plate, edge with a recessed band. Hammer with missing clamp and upper jaw. Ba...

dating: 18th Century provenance: Tuscan-Emilian area, Slightly-round lock plate with relieved face at the tang, remains of racemes-shaped engravin...

dating: Second half of the 17th Century provenance: Northern Central Italy, Flat plate with lobed tang, of slightly-curved shaped. Hammer with thr...

dating: third quarter of the 17th Century provenance: Northern Central Italy, Flat plate, cusped only at the front, and with tang provided with lo...

dating: circa 1800 provenance: Tuscan-Emilian area, Flat, curved plate, with oblique borders. Tang engraved with floral engraving, the central par...

dating: Second half of the 18th Century provenance: Tuscan-Emilian area, Roundish lock-plate featuring a fine, relieved mask at the tang, the hamm...

dating: second quarter of the 17th Century provenance: Northern Central Italy, Flat plate with cusped borders and with lobed tang. Remains of engr...

dating: Second half of the 18th Century provenance: Tuscan-Emilian area, Strong structure with slightly-round plate, tang with relieved mask. hamm...

dating: 1809 provenance: Anghiari, Flat plate with oblique edges and long tang, finely engraved with racemes at the surface, as well as the hammer...

dating: first quarter of the 17th Century provenance: Northern Italy, Flat plate, border with cusps, rounded tang provided with button. Hammer wit...

dating: first quarter of the 17th Century provenance: Northern Italy, Flat plate with cusped borders. Tang with button, hammer with octagonal base...

dating: second quarter of the 17th Century provenance: Brescia, Flat plate with oblique borders. Tang finely carved as a monster's head, worked in...

dating: 18th Century provenance: Marche, Flat plate with remains of engravings. The hammer's throw worked in-the-round, depicting a figure holding...

dating: 1791 provenance: Marche, Flat, slightly-curved plate with swallowtailed edge, spring and hammer carved with small curls and spirals, pan w...

dating: 18th Century provenance: Central Italy, Slightly-roundish plate with relieved mask at the tang. Baluster-shaped hammer engraved with leave...

dating: 18th Century provenance: Central Italy, Slightly-roundish plate engraved with a bird with open wings around racemes and on a hyphened back...

dating: last quarter of the 18th Century provenance: Central Italy, Flat plate with with swallowtail edges, hammer with baluster-shaped throw, spr...

dating: early 18th Century provenance: Central Italy, Flat plate with flower-shaped engraving at the tang. Moulded pan, spring with small carvings...

dating: 1810 provenance: Anghiari, Slightly-round plate, decorated with geometrical frames. Small engravings and carvings with spirals. Signed an...

dating: 18th Century provenance: Central Italy, Flat lock plate with oblique borders, fine mask at the tang with bearded face in relief and decora...

dating: Second half of the 17th Century provenance: Central Italy, With flate lock featuring remains of carvings and raceme-shaped engravings on a...

dating: Mid 18th Century provenance: Marche, Flat plate decorated with a beautiful warrior's profile with helmet at the tang, carved with racemes ...

dating: late 18th Century provenance: Italy or Spain, Flat plate with oblique borders featuring outlines. The rein of the hammer engraved and shap...

dating: 18th Century provenance: Southern Italy, Featuring a flat plate, with oblique and undulated borders, featuring remains of floral engraving...

dating: 1736 provenance: Madrid, Flat plate, with oblique borders, engraved with a small frame. Tang with an engraving depicting a trophy with bow...

dating: 18th Century provenance: Southern Italy, Flat plate with oblique and undulated borders, decorated with engraved grotesque outlines, with s...

dating: Late 17th - Early 18th Century provenance: Germany, Big, flat plate, with long, rectangular tang and outlines. On the right side a plaque ...

dating: First half of the 18th Century provenance: Florence, Flat plate with oblique borders. Hammer shaped as a swan's neck, the upper jaw and th...

dating: Second half of the 18th Century provenance: Amsterdam, Slightly-round plate, featuring a lozenge mark with the initials VOC of the Dutch E...

dating: mid-17th Century provenance: Northern Central Italy, Flat plate, finely engraved in bas-relief at the tang and with a mask surmounted by a...

dating: provenance: North Italy, Flat plate with oblique borders, with lowered tang featuring an engraving with trophies. The central part with f...

dating: Second half of the 17th Century provenance: Brescia, Slightly-round plate. Lobed tang, cared with racemes. Fine hammer, shaped as a swan's...

dating: circa 1800 provenance: England, Slightly round, iron lock, signed 'BARNETT' at the center. Complete mechanism, a small mark at the back. ...

dating: Mid 19th Century provenance: United Kingdom, Made of iron, with working mechanism. The front block marked 'MYANARD'S PATENT' and with pate...

dating: late 18th Century provenance: England, Box-lock type frame, engraved with floral motifs and with openable gate. Flintlock. Lateral cylinde...

dating: 18th Century provenance: Europe, Brass body, elongated towards the back. The back engraved with floral motifs. Pan at the front. Interesti...

dating: 18th Century provenance: Europe, Brass and iron body, elongated towards the back. The back engraved with a farmer and floral motifs. Pan a...

dating: 18th Century provenance: USA, Brass and iron body, elongated towards the back. The back engraved with floral motifs. Pan at the front prov...

dating: late 18th Century provenance: Brescia, Bronze, two-stage barrel, tang decorated with oblique grooves and provided with a button to open it...

dating: Second half of the 18th Century provenance: North Italy, Bronze, two-stage barrel, octagonal at the first part and finely engraved with fl...

dating: late 17th Century provenance: Spain, Pressed and curved, cow-horn body, of medium size. Iron mounts. Iron hook with the base carved as a l...

dating: early 18th Century provenance: Spain, Curved, cow-horn body. The bottom and the upper lid made of iron. Iron hook, provided with small rin...

dating: late 17th Century provenance: Italy, Curved and pressed, cow-horn body with some holes due to time; the front decorated with hearts, from ...

dating: First half of the 18th Century provenance: Germany, Pressed horn body of triangular shape, fuse carved with rings. One side depicting a fa...

dating: 19th Century provenance: Europe, All different, some with brass or wooden mounts. height 14 - 27 cm.

dating: early 17th Century provenance: Germany, Body of circular shape, made f wood decorated with concentrical circles and slightly lowered at th...

dating: circa 1600 provenance: Germany, Round, briarwood body with the central area relieved. Iron mounts in fine antique patina. Fuse shaped as a...

dating: circa 1600 provenance: Germany, Made of wood, of round shape. With round bone inserts. Wooden fuse with brass closure featuring an externa...

dating: 19th Century provenance: Germany, Extraordinarily carved boxwood with three hounds fighting with a deer and a boar, pierced at the center,...

dating: 17th/19th Century provenance: Northern Italy, Iron body, convex on the front side, flat on the back, tapered towards the top. The surface ...

dating: circa 1600 provenance: Brescia, Iron body of typical flat shape at the back and convex at the front, tapered upwards. Provided with a long...

dating: circa 1600 provenance: Brescia, Iron body, convex at the front, flat at the back and tapered upwards. The front part with longitudinal gro...

dating: early 17th Century provenance: Northern Italy, Iron body, convex on the front and flat at the back, tapered upwards. Featuring a brass ban...

dating: circa 1800 provenance: Central Europe, Tiny, convex oval, metal flask with yellow metal frame, fuse and stopper, completely covered with f...

dating: 19th Century provenance: Europe, Drop-shaped body covered with ray-skin. The border with a brass band. Three fixed loops, the fourth is mi...

dating: 18th Century provenance: Japan, Body of elongated shape, made of ferrous metal, covered with thick ray-skin (some missing parts). The bord...