47
Los
47
c.1952 Nimbus 750cc Model C Four Frame no. 10749 Engine no. 12783 Please kindly note that this motorbike will be available for viewing by prior appointment in Dortmund: please contact eva.lengler@bonhams.com for booking. The result of diversification by the Danish vacuum cleaner manufacturer, Fisker & Nielsen, the Nimbus motorcycle first appeared in 1919. Unusually, only inline four-cylinder models were built. These were of advanced design, using shaft final drive and pressed steel frames right from the start of production, and pioneered the use of the telescopic front fork in the mid-1930s. The early models featured a distinctive tubular spine frame that doubled as the fuel tank, soon gaining the nickname 'stovepipe'. The low-compression Nimbus engine was noted for its smoothness and flexibility. In 1928, motorcycle production was suspended to enable the company to concentrate on producing its Nilfisk vacuum cleaners, and when the new Nimbus appeared in 1934 it was with a power unit that showed strong motor-industry influence, being constructed along car lines with integral crankcase/cylinder block in cast iron and a detachable alloy sump. The cast-iron one-piece cylinder head was topped by an alloy housing for the single overhead camshaft, which was driven by shaft-and-bevel gears. A single-plate clutch transmitted power to the three-speed gearbox. The original 'stovepipe' frame had been superseded by one made from flat spring steel, while foot change for the gearbox, a beefier front fork, and larger brakes had been added by the end of the 1930s. Nimbus was ahead of its time in many ways, introducing its first telescopic front fork in 1934 and adopting closed-circuit crankcase ventilation many years before the automobile industry. From then onwards the Nimbus changed little until series production was ended in 1954, once again to free up resources for the vacuum cleaner business. An additional few machines were assembled from spares between 1954 and 1959 but none have been made since then. Production was always on a limited scale, but such is the quality of the Nimbus that many remain in service today. This Nimbus Four comes with two instruction manuals (in Danish); a German Abmeldebescheinigung (de-registration document) from the 1970s; and a German Kraftfahrzeugbrief (registration document). Key not required Footnotes: Please kindly note that VAT at the prevailing german rate (currently 19%) will be added to the buyer's premium which will be invoiced on a VAT exclusive basis. If you are planning to export, please make the department aware. Lot to be sold without reserve. For further information on this lot please visit Bonhams.com For further information about this lot please visit the lot listing
12 % + VAT
Ihre Anfrage wurde an das Auktionshaus geschickt
Entschuldigung, es gab eine Fehlermeldung bei der Sendung Ihrer Anfrage. Bitte versuchen Sie es zu einem späteren Zeitpunkt noch einmal.
c.1952 Nimbus 750cc Model C Four Frame no. 10749 Engine no. 12783 Please kindly note that this motorbike will be available for viewing by prior appointment in Dortmund: please contact eva.lengler@bonhams.com for booking. The result of diversification by the Danish vacuum cleaner manufacturer, Fisker & Nielsen, the Nimbus motorcycle first appeared in 1919. Unusually, only inline four-cylinder models were built. These were of advanced design, using shaft final drive and pressed steel frames right from the start of production, and pioneered the use of the telescopic front fork in the mid-1930s. The early models featured a distinctive tubular spine frame that doubled as the fuel tank, soon gaining the nickname 'stovepipe'. The low-compression Nimbus engine was noted for its smoothness and flexibility. In 1928, motorcycle production was suspended to enable the company to concentrate on producing its Nilfisk vacuum cleaners, and when the new Nimbus appeared in 1934 it was with a power unit that showed strong motor-industry influence, being constructed along car lines with integral crankcase/cylinder block in cast iron and a detachable alloy sump. The cast-iron one-piece cylinder head was topped by an alloy housing for the single overhead camshaft, which was driven by shaft-and-bevel gears. A single-plate clutch transmitted power to the three-speed gearbox. The original 'stovepipe' frame had been superseded by one made from flat spring steel, while foot change for the gearbox, a beefier front fork, and larger brakes had been added by the end of the 1930s. Nimbus was ahead of its time in many ways, introducing its first telescopic front fork in 1934 and adopting closed-circuit crankcase ventilation many years before the automobile industry. From then onwards the Nimbus changed little until series production was ended in 1954, once again to free up resources for the vacuum cleaner business. An additional few machines were assembled from spares between 1954 and 1959 but none have been made since then. Production was always on a limited scale, but such is the quality of the Nimbus that many remain in service today. This Nimbus Four comes with two instruction manuals (in Danish); a German Abmeldebescheinigung (de-registration document) from the 1970s; and a German Kraftfahrzeugbrief (registration document). Key not required Footnotes: Please kindly note that VAT at the prevailing german rate (currently 19%) will be added to the buyer's premium which will be invoiced on a VAT exclusive basis. If you are planning to export, please make the department aware. Lot to be sold without reserve. For further information on this lot please visit Bonhams.com For further information about this lot please visit the lot listing
12 % + VAT
Katalog
Stichworte: Nimbus, Motorrad, Car